HPE JH407A OfficeConnect 1405 5G v3 Unmanaged L2 Gigabit Ethernet (10/100/1000) Grey. The HPE OfficeConnect 1405 Switch Series is a fixed-port Layer 2
switch that is plug-and-play and optimized for small offices. These switches
come pre-configured with Ethernet connections made with low-cost copper wiring.
They are designated Class B, energy-efficient, and quiet. They include
capabilities like auto-negotiation that are beneficial to administrators. They
are perfect for enterprises concerned with a total cost of ownership since they
are designed for great dependability, extended life, and low power usage.
What's brand new?
Small offices will benefit from new entry-level 5G and 8G port
switches.
No configuration is necessary; simply plug and play.
Improved network efficiency through Quality of Service (QoS) and
flow control.
Low-power Ethernet (Energy Efficient Ethernet)
The HPE OfficeConnect 1405 Switch Series provides unmanaged plug-and-play simplicity.
A multi-port LED display with per-port indicators shows status, activity, speed, and full-duplex operation at a glance.
Flow control aids in the reliable transmission of data during full-duplex operation.
Connectivity and Performance - On all 10/100 and 10/100/1000 ports, the HPE OfficeConnect 1405 Switch Series with Auto-MDIX automatically adjusts to straight-through or crossover cables.
For Gigabit Ethernet ports, jumbo packet capability is limited to 9216-byte frames to improve the performance of bigger data transfers.
Every port's throughput is doubled when it has half/full-duplex auto-negotiating functionality.
Ports & interfaces |
---|
Copper ethernet cabling technology | 10BASE-T,100BASE-TX,1000BASE-T |
Basic switching RJ-45 Ethernet ports quantity | 5 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Performance |
---|
Packet buffer memory | 1 MB |
Stackable | No |
Technical details |
---|
Product colour | Grey |
Stackable | No |
Rack mounting | No |
Management features |
---|
Switch type | Unmanaged |
Quality of Service (QoS) support | Yes |
Switch layer | L2 |
Network |
---|
Auto-sensing | Yes |
Copper ethernet cabling technology | 10BASE-T,100BASE-TX,1000BASE-T |
Networking standards | IEEE 802.3,IEEE 802.3ab,IEEE 802.3u |
Full duplex | Yes |
Flow control support | Yes |
Auto MDI/MDI-X | Yes |
10G support | No |
Data transmission |
---|
Throughput | 7.4 Mpps |
Latency (10-100 Mbps) | 3 µs |
Latency (1 Gbps) | 2.6 µs |
Packet buffer memory | 1 MB |
MAC address table | 2048 entries |
Switching capacity | 10 Gbit/s |
Jumbo frames support | Yes |
Memory |
---|
Packet buffer memory | 1 MB |
Design |
---|
Product colour | Grey |
Stackable | No |
Rack mounting | No |
Power |
---|
AC input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Power consumption (typical) | 3 W |
Power over Ethernet (PoE) |
---|
Power over Ethernet (PoE) | No |
Operational conditions |
---|
Storage temperature (T-T) | -40 - 70 °C |
Storage relative humidity (H-H) | 15 - 95% |
Operating temperature (T-T) | 0 - 40 °C |
Operating relative humidity (H-H) | 15 - 95% |
Weight & dimensions |
---|
Width | 114.3 mm |
Depth | 91.4 mm |
Height | 35.6 mm |
Weight | 180 g |
Products with variety of different conditions
We at APEX IT DEVICES LTD offers IT & Allied products in different "conditions" because we strongly believe in the recycling of equipment already used and to reserve large profit margins for its customers. We can arrange for you a wide range of products and solutions at competitive prices, with a reduction of upto 90% in the purchase price compared to the new product.
Alternative products is state of the art solution to the new product from which it differs in most cases only for a different packing and or a little lower outlook level, but whose perfect functioning is always guaranteed to the maximum as the new product.
The sale of refurbished products represents a significant demonstration of attention to the environmental issues to which our company has always paid attention and contributed towards environmental protection.
NEW BULK
New spare parts with neutral packaging (box or envelope). These are products belonging to bundles or special sales offers (set of several products and / or configurations) and consequently without the manufacturer's original packaging. Guarantee provided by APEX IT with different duration and methods of intervention based on the product category and brand.
NEW OPEN BOX
Products in this category are new product to which only the original external packaging has been opened for possible checks, warranties, functionality or by mistake. Rest assured warranty equal to the new one provided by the manufacturer to the extent and within the times indicated in the product sheet and in the accompanying information material. To supplement the basic warranty, support options provided by the vendor are available like a new product.
NEW RETAIL
New Retail Products warranty provided by the manufacturer to the extent and timing indicated in the product sheet and in the accompanying information material. New product with packaging and warranty as provided by the vendor/manufacturer for so-called “shelf” products and therefore with packaging provided for the sale of even the single piece. To supplement the basic warranty, support options provided by the vendor or manufacturer or alternatively APEX IT is also available with the additional support and assistance services.
NEW SPARE
New spare parts but without original packaging as they are shipped in special multi-product containers. They have a different code from the corresponding new retail code as provided by the vendor. Warranty provided by the manufacturer to the extent and timing indicated in the product sheet and in the accompanying information material.
DAMAGED BOX
New product with little damaged outer packaging due to in transit mishandling by the courier companies. Rest assured warranty equal to the new one provided by the manufacturer to the extent and within the times indicated in the product sheet and in the accompanying information material. To supplement the basic warranty, support options provided by the vendor are available like a new product.
EX DEMO
Used product but of recent manufacture used for demonstrations at the fair or at customers. In excellent working condition. Guarantee provided by APEX IT with different duration and methods of intervention based on the product and brand. To integrate the basic APEX IT makes available.
FACTORY REFURBISHED
Refurbished products and tested by the vendor, with original packaging or alternative packaging available. 30-90 days warranty provided by the vendor depending on the type and brand of product. To supplement the basic warranty, support options provided by the vendor are available like a new product or alternatively APEX IT makes available the additional support and assistance services to its valued customers.
OEM
New product branded with the company logo that originally made the component for the major vendors on the market. Warranty provided by the manufacturer to the extent and timing indicated in the product sheet and in the accompanying information material.
REFURBISHED
Product reconditioned and tested in all its parts, with neutral packaging. APEX IT offers exclusively products with a degree of reconditioning:Product reconditioned and tested in all its parts, with neutral packaging. APEX IT offers exclusively products with a degree of reconditioning:
A Category |
B Category |
C Category |
In this category products in excellent aesthetic and functional conditions comparable to a new product |
In this category products in good aesthetic and functional conditions |
In this category products that may have normal condition and slight external beauty imperfections |
Warranty 30-180 days or 1-2 Years in some cases depending on the type and brand of product, provided by APEX IT
To integrate the APEX IT makes available the additional support and assistance services t its customers as and when required.
RENEW
They differ from the New Retail (new) product only for the presence of the letter “R” in addition to the product code (present both on the label of the external packaging and on the one positioned on the product). The products belonging to the "HP Renew Program" packaged in the manufacturer's original packaging. Appearance, packaging, manuals, DO NOT differ from New Retail, see HP Renew Program. Like new HP products, the warranty period starts from the date of purchase and is provided by the manufacturer to the extent and within the timing indicated in the product sheet and in the information material. To supplement the basic warranty, support options provided by the vendor are available like a new product or alternatively we make available the additional support and assistance services.
USED
These are entire apparatuses or spare parts removed from machines withdrawn and consequently used. The product used with normal packaging (box or envelope). Guarantee provided by APEX IT 1-3 months from the date of purchase.