The HPE 1420 Switch Series consists of unmanaged Gigabit Ethernet switches for small businesses and others looking for plug-and-play basic Layer 2 connectivity for their network, including low-cost PoE+ and 10GbE uplink models. The HPE 1420 Switch Series has four models: 16-port 10/100/1000, 24-port 10/100/1000 with two SFP Gigabit ports, 24-port 10/100/1000 ports of which 12 are PoE+ enabled (124 W PoE budget), and 24-port 10/100/1000 with two SFP+ 10GbE ports.
Features High-performance GbE Layer 2 Switching, Cost-effective and Easy to Deploy
The HPE 1420 Switch Series offers small businesses and others Layer 2 Gigabit Ethernet switching with unmanaged affordability and plug-and-play simplicity. - Gigabit Ethernet is the most recommended and deployed networking technology today, delivering 10 times more performance than Fast Ethernet. - Unmanaged switches are the most economical offerings, ideal for locations needing only basic Layer 2 switching in a flat single tier network.
Model Choices to Meet Most Design Needs for Basic Layer 2 Networking
The HPE 1420 Switch Series has four models to choose from, all with Gigabit performance but offering different uplink options. Consider the 16-port model for locations needing fewer connections and one of the 24-port models where more connectivity is required. - The 1420-24G-2SFP model with SFP uplinks is ideal where Gigabit fiber is required, while the 1420-24G-2SFP+ 10G Uplink model with SFP+ uplinks is available where 10GbE is needed now or in the future. - Anticipate the installation of IP voice, wireless Access points, or video surveillance cameras by deploying Power over Ethernet (PoE). Choose the PoE+ model for highly cost-effective PoE deployments. - All 1420 Switch Series models are fanless for silent operation, usable in office settings around workers. Units have internal power supplies with power-cord plug-in simplicity. - Units can be deployed for desktop operation or can be rack mounted.
Automated Features for Hands-off Operation
All HPE 1420 Switch Series models are plug-and-play with zero configuration and no required ongoing administration. - The switch series has the company's only unmanaged PoE model, with fully automated support for powering compatible IP phones, video surveillance cameras or wireless Access Points. - The HPE 1420-24G-2SFP+ 10G Uplink Switch requires no configuration beyond installation of optional 10GbE transceivers to achieve 10GbE speeds. Alternatively, use today with Gigabit SFP transceivers if higher performance is merely a future requirement. - IEEE 802.1p prioritization and other QoS features automate the preferred handling of high priority traffic, including Differentiated Services Code Point (DSCP) set priorities. - The 1420 Switch Series supports Jumbo packets to improve the performance of large data transfers.
Cost-effective Ownership for Now and into the Future
The HPE 1420 Switch Series offers a cost-effective upgrade path to next-generation 10GbE networks to reduce performance bottlenecks when connecting to storage and servers. - The switch series includes PoE+ options to power IP devices without the cost of additional cabling for power. - Green features include energy-efficient Ethernet IEEE 802.3az, auto-power down mode on idle ports, and power savings on short distance cables for low power consumption. - Limited Lifetime Warranty.
| Ports & interfaces | |
|---|---|
| Copper ethernet cabling technology | 10BASE-T,100BASE-TX,1000BASE-T | 
| Basic switching RJ-45 Ethernet ports quantity | 8 | 
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) | 
| Performance | |
| Packet buffer memory | 1.5 MB | 
| Stackable | Yes | 
| Technical details | |
| Form factor | 1U | 
| Product colour | Grey | 
| Stackable | Yes | 
| Rack mounting | Yes | 
| Management features | |
| Switch type | Unmanaged | 
| Quality of Service (QoS) support | Yes | 
| Switch layer | L2 | 
| Network | |
| Auto-sensing | Yes | 
| Copper ethernet cabling technology | 10BASE-T,100BASE-TX,1000BASE-T | 
| Networking standards | IEEE 802.3,IEEE 802.3ab,IEEE 802.3u | 
| Full duplex | Yes | 
| Flow control support | Yes | 
| Auto MDI/MDI-X | Yes | 
| 10G support | No | 
| Data transmission | |
| Throughput | 11.8 Mpps | 
| Latency (10-100 Mbps) | 3 µs | 
| Latency (1 Gbps) | 2.6 µs | 
| Packet buffer memory | 1.5 MB | 
| MAC address table | 4096 entries | 
| Switching capacity | 16 Gbit/s | 
| Jumbo frames support | Yes | 
| Memory | |
| Packet buffer memory | 1.5 MB | 
| Design | |
| Form factor | 1U | 
| Product colour | Grey | 
| Stackable | Yes | 
| Rack mounting | Yes | 
| Power | |
| AC input voltage | 100 - 240 V | 
| AC input frequency | 50 - 60 Hz | 
| Power consumption (typical) | 80 W | 
| Power over Ethernet (PoE) | |
| Total Power over Ethernet (PoE) budget | 64 W | 
| Power over Ethernet (PoE) | Yes | 
| Operational conditions | |
| Storage temperature (T-T) | -40 - 70 °C | 
| Storage relative humidity (H-H) | 15 - 95% | 
| Operating temperature (T-T) | 0 - 40 °C | 
| Operating relative humidity (H-H) | 15 - 95% | 
| Weight & dimensions | |
| Width | 234.7 mm | 
| Depth | 104.9 mm | 
| Height | 26.9 mm | 
| Weight | 700 g | 
We at APEX IT DEVICES LTD offers IT & Allied products in different "conditions" because we strongly believe in the recycling of equipment already used and to reserve large profit margins for its customers. We can arrange for you a wide range of products and solutions at competitive prices, with a reduction of upto 90% in the purchase price compared to the new product.
Alternative products is state of the art solution to the new product from which it differs in most cases only for a different packing and or a little lower outlook level, but whose perfect functioning is always guaranteed to the maximum as the new product.
The sale of refurbished products represents a significant demonstration of attention to the environmental issues to which our company has always paid attention and contributed towards environmental protection.
| A Category | B Category | C Category | 
|---|---|---|
| In this category products in excellent aesthetic and functional conditions comparable to a new product | In this category products in good aesthetic and functional conditions | In this category products that may have normal condition and slight external beauty imperfections |